Foil Accessories

Bolts for your Axis foil. There are surf and windsurf specific bolts for the different length mounts

Duotone wing wrist leash perfect for wind wings

Medium is 4'0

Large is 5'5

Duotone valve adaptor. Adapts a standard kite pump hose to the Duotone valve system

Balin Foil and SUP Downwind Leash.

The Downwinder coil was developed working to the specs reqired by our local Team Guys. We found some wanted a compact 2.1m coil only. Available in Ankle, Knee and Waist. Assorted colors.

• 4mm padding
• Extra foam rail protection
• Velcro foil mast opening
• Transparent tool pockets inside
• Adjustable board webbing straps
• Basic shoulder strap (detachable)
• Carry handles

Made to be as light as possible AND super comfy - with our new pressed memory foam, they come with our Titanium washers and 316L screws. Price is for 1 Footstrap.
When fitting, it's important that the washer is properly tightened. The memory foam needs to be fully compressed. Our Titanium hex washer is designed with a recessed underside to press into the memory foam and clamp the straps internal webbing to the board.

Make sure you do these up tight. The Washer needs to be the strength point.
The washer outline and recesses should be imprinted into the memory foam if removed.

A 10g tube of Tef-Gel corrosion eliminator to keep your nuts and bolts from rusting. A must for every foilboard.

T Nuts for track mount foilboard. 8mm M8 metric thread. Price is for 1 nut

Balin Sup covers are now available for your Sup Foilboard in two sizes currently with the following sizes:

Set of 4 Titanium T Nuts, Bidirectional Titanium washers with Torx head stainless steel 316L screws

Attention to design and detail is what sets Armstrong apart! We are committed to using the very best materials for each respective job, this is why we use Titanium and Stainless steel 316L for our hardware and fittings. Ultimate strength and no corrosion means your mast to board connection is dependable.

* We recommend changing out your screws annually as repeated use will eventually reduce their strength.

WIP Wipper 2.0 Helmet

One Size M/L/XL

*Disco Pink is 51-56cm

• Adjustable to fit 55-61CM

Multi-Impact EPP Liner Construction Technology

REGAINS ITS SHAPE FOR REPETITIVE USE

Hard ABS Shell

SUPER ROBUST CONSTRUCTION FOR BETTER RESISTANCE

360° MICROMETRIC FIT SYSTEM

• ADJUSTABLE HEADBAND TO GET THE PERFECT FIT AROUND THE HEAD

HIGHT VISIBILITY COLORS

• FOR BETTER SAFETY

COMES WITH 2 REMOVABLE EAR PROTECTORS

• CAN FIT AUDIO BBT COMMUNICATION SYSTEM

UniFoil titanium wingnuts with T nuts. Move your foil easily.

Mystic Star Wingfoil Boardbag for Hydrofoil Boards

• 8mm padding
• Extra foam rail protection
• Transparent tool pockets inside
• 2 removable padded gear pockets for mast, fuselage, mast foot, stabilizer & front wing
• Adjustable board webbing straps
• Basic shoulder strap (detachable) carry handles
• 3D Mesh airvent

High Density Thermoformed Foam

• To improve comfort when falling

Protective Side Pads

• To cover ribs 

Low Profile & Wide Openings

• Designed to ensure an excellent freedom of movement

5 Easy Access Pockets With Different Sizes

• 1 Large zipper. 1 Black panel. 2 Shoulder. 1 Knife pocket. 1 Line Cutter area .

The Armstrong Foil Kit Carry Bag.

Carry your foil around in a big bag so all your friends know you are a foiler and are going foiling. Medium for 75cm masts/wings and shorter, Large for 85cm masts/wings and longer with a zip so the end can stick out.

Not sure if you prefer a waist or wrist leash? Get the set that comes with both a cuff and waist, or use both wrist and waist for your board.

Materials

• Dyneema / elastic shock absorbing leash cord
• Padded neoprene belt
• Pre-curved soft neoprene wrist cuff

Features

• 1" [ 25mm ] UTX Big Dog side release buckle
• Padded neoprene belt
• Dyneema / elastic shock absorbing leash cord
• 2" [ 50mm ] pre-curved soft neoprene wrist cuff
• Integrated leash attachment point

Super Stretch Neoprene & Super Thin Construction

• The thinnest PFD’S back of the market for the best tack & jibe

Low Profile & Wide Openings

• Design to ensure an excellent freedom of movement

Harness Loop

• To prevent the ride-up commonly seen on some PFD

2 Easy Access Pockets With Different Sizes

• 1 Large 3D stretch zipper. 1 Shoulder.

Flight Control

Experience greater control and connection to your foil with our lightweight cushioned foil board straps. The V-shaped front strap allows you to switch feet when tacking, without needing to double-up on straps. The straps also provide a tactile reference for ideal foot positioning, easier take-offs and fine-trimming of the foil.

With a wide range of adjustment for all shapes and sizes, the Free-V Straps let you fully customise your fit and stance for improved flight control.

The Ion SUP CORE Stubby Boardbag for SUP and Foilboards. The perfect foilboard bag 5mm foam padding, silver PE on the bottom outside and strong webbing around the edges make sure the SUP CORE_Boardbags will guard and protect your beloved boards like you would a newborn baby!

5'4x26"

6'11x30"

Hydrofoil mounting bolts. M8 Brass T Nuts and stainless Torx head bolts. Sold as a set of 4 nuts and 4 bolts

North foil wing wrist leash.

Elasticised leash for easy grip and fast wing retrieval. Supplied with all Nova wings, the high-quality nylon webbing leash features good elasticity in the webbing and bungee cord core, providing greater forgiveness and helping to soften the jolt when your wing escapes. With easy one-handed velcro fastening and fast, safe release when needed.

Foilboard T nut and Torxs bolts M8 size hardware

North Wing Harness loop fixed. Winging with a harness allows you to stay out for twice as long, enables one-handed riding and minimizes the risk of repetitive strain injury. This lightweight, minimalist loop stays out of the way while pumping onto the plane. ​
INCLUDES: 1x Wing Harness Loop with Velcro

Brass T nuts with closed bottom. Set of 4 nuts.

Armstrong foil screw set. Comes with all the screws and barrel nuts needed to assemble the fuselage and wings. T Nuts that mount the foil to the board are not included.

Comes with:

Polycarbonate Pro Shims (PPS), allowing more than 5 angle settings at 0.5 degree increments.

The set includes: 2 X Dome Head Screw 19.5mm, 2 x 0.5° PPC Shims, 2 X 1° PPC Shims, 5 X Countersink Screw 28.5mm, 4 X Dome Head Screw 25mm, 2 X 8mm Custom Ti Barrel Nut, 1 X T30 Bit

T Nuts M6 6mm For Foilboard.

Individual T6 6mm T nut for foilboard.

• CE approved
• Designed for watersports only
• Lightweight outer shell with ventilation holes
• Dial system 3D
• Mesh detachable fit mesh pads
• Fidlock quick release chin closure
• Detachable ear cover compatible (not included)

Armstrong Shim TTF (Titanium Trim Fairings) Our state of the art rear wing configuration incorporates an easy to change, honeycomb Titanium Trim Fairings that allow you to fine tune the angle of the Tail Wing to your personal requirements. The TTF sets the angle of attack of the tail wing. We use -2 degree, Zero degree and +1 degree trim options. The TTF works in conjunction with changing the front wings, fueslarge length and your required use and feeling.

-2 Degree: Ideal for learning, heavier riders, larger boards and windsurf freeride. Tail has more down force giving front wing more lift at lower speeds and better Yaw (directional) stability.

Zero Degree: Ideal for all round progression.

+1 Degree: More top end speed and control, better pump for advanced riders looking to maximise glide. During a drop or speed spike the +1 helps keep the wing in the water and adds control during turns.

Mystic Star Foilboard Daypack board bag.

A simple and sleek boardbag that doesn't compromise on protection. The Star Foilboard Daypack offers 4mm padding, extra foam protection around the rails, and a velcro foil mast opening. This boardbag is perfect for everyday trips to and from the beach and comes in multiple sizes.

Features:

• 4mm padding
• Extra foam rail protection
• Velcro foil mast opening
• Transparent tool pockets inside
• Adjustable board webbing straps
• Basic shoulder strap (detachable)
• Carry handles

Mystic Star Wingfoil Wheeled Boardbag for Hydrofoil Boards

• XL Wheels for easy transport over rough ground
• 8mm padding
• Extra foam rail protection
• Transparent tool pockets inside
• Adjustable board webbing straps
• Detachable shoulder strap carry handles
• 3D Mesh airvent

The Quiksilver Foil Waistband coiled leash is an ideal leash to keep you & your board safe

Features: - 8' x 7mm TPU Coil

- 10mm Webbing

- Neoprene cuff / waistband

- Stainless Steel Swivels

Set of 4 Titanium T Nuts with Torx head Ti screws, with countersunk heads.

Attention to design and detail is what sets Armstrong apart! Armstrong uses the very best materials for each respective job, this is why we use Titanium for their hardware and fittings. Ultimate strength and no corrosion means your mast to board connection is dependable.

* We recommend changing out your screws annually as repeated use will eventually reduce their strength.

25MM or 30MM length Screws

Ion Rogue wing foiling waist harness.

ION introduces their first harness, exclusively targeted toward wing foiling. The minimalist and ultra-lightweight Rogue follows what other wind water sports already established. Wearing a harness improves force distribution and takes pressure from the arms resulting in reduced fatigue and lower physical effort. The fully Curv construction offers flexibility and additional back support. The Rogue features a movable hook which makes paddling out easy. You only feel it when you use it.This harness is not intended for windsurfing or kitesurfing!

Steel T40 Torx tool torx key. Suits most torx bolts used on foils

Mystic Foilbag Foil Carry and Travel Bag. The perfect match for your foilboard – the Foilbag. It's suitable for all your foil gear and offers total protection with a thick layer of padding between three storage compartments.

Featuring transparent pockets to store your tools and screws, and three straps to secure everything tightly inside.

Removable padded divider with integrated pockets 2x (40x105cm) Protected shaft pocket PVC coated 420D Polyester

Titanium Screw and Slider T Nut Set fot foilboard. Keep it light weight.

Contains 4 x Titanium 25mm bolts, 4 x Titanium T Nuts.

Axis Titanium Screw and Slider T Nut Set. Keep it light weight.

4 x Titanium 25mm bolts, 4 x Titanium T Nuts.

The Quiksilver Foil knee / calf coiled leash is an ideal leash to keep you & your board safe

Features: - 6' x 7mm TPU Coil

- 10mm Webbing

- Neoprene cuff

- Stainless Steel Swivels

Control your Foil Drive from your paddle with our ergonomically designed Paddle Mount. 

These mounts easily install to your paddle and can be altered for both goofy and natural footed riders, simply switch the position of the removable wedge using your 2.5mm driver.

Whilst we have recommendations on positioning of the mount, everyone has a slightly different preference of where feels natural. You can mount for use with your top hand, or flip the controller upside down for use with your lower hand, halfway down the paddle.

__

You must apply 2 strips of electrical tape down the shaft of your paddle before installation. This is both to protect the surface, and to create a softer surface to the clamping force of the mount to grip to. The bolts only requiring finger tight tension to remain in position.

We recommend leaving the paddle mount slightly loose for the first few uses to allow for on water fine tuning of the position on the paddle.

The DaKine Wing Travel Wagon is designed to get your wing, foil, or E-foil to its destination safely. This sturdy coffin-style bag is ready to roll through airports and train stations alike, with ample space for foils, kites/wings, boards, batteries, and harnesses. It comes equipped with integrated bungee storage to secure your foils and accessories, as well as a heavy-duty board divider to keep your board protected from your foils.

Dimensions

• 5’0” [ 152 cm ] x 65 x 30cm
• 5'4" [ 162cm ] x 70 x 30 cm
• 5'8" [ 172 cm ] X 80 X 30cm
• 6"6 [198 cm ] x 85 x 30cm

Balin 6'5" Multi Bulky boardbag.

Nominally fits 3 boards 3 inches thick (Maybe 4 depending on combined thickness up to 9 inches), with the longest board matching the cover size. Max width 24 Inches.

600D Poly Canvas top, Silver Tarpee Bottom. 10mm Foam. Shoulder Strap. 10mm zip with non corroding Plastic Sliders. Pop up (zip) section to allow one board with fixed fins. Air Vents let moisture out during storage. Internal & External Cinch Straps Secure the load. Weight 5-6kg.

T30 Torx tool for most M6 Foilboard Torx bolts.