Kiteboard Foils

The Armstrong HS High Speed Foil kits are super stable, responsive and have great glide. It is the foil of choice for foilboarders looking for fast carving turns. HS kits are the next step for progressive foilers wanting to take their riding to the next level.

HS625 FOIL KIT

HS625 Front Wing, HS232 Rear Wing, 85cm mast, TC60 Fuselage

HS850 FOIL KIT

HS850 Front Wing, HS232 Rear Wing, 85cm mast, TC60 Fuselage

HS1050 FOIL KIT

HS1050 Front Wing, HS232 Rear Wing, 72cm mast, TC60 Fuselage

HS1250 FOIL KIT

HS1250 Front Wing, HS232 Rear Wing, 72cm mast, TC60 Fuselage

HS1550 FOIL KIT

HS1550 Front Wing, HS232 Rear Wing, 72cm mast, TC60 Fuselage

HS1850 FOIL KIT

HS1850 Front Wing, HS232 Rear Wing, 72cm mast, TC60 Fuselage

The new 950 Spirit Carve wing was developed for maximum manoeuvrability and glide to perform tacks, jibes and 360s. Essentially it ́s a scaled down version of a pure surf foil wing. The 950 lifts early and has an incredible stability for ripping smooth, controlled carves on tiny waves or flat water. This wing is all about control, carving, glide and seamless transitions with incredible stability and predictability for those looking for a great cross over between kite and surf foil feeling.

Available in:
950 wing and a 60 mast, 75 mast or 90 mast

The low aspect ratio profile has a huge amount of lift and opens up a new realm of possibilities for slack line tricks and carves where no kite power is needed. The wing provides the feeling that you can surf the wing rather than only be pulled around by the kite all the time. Due to his profile, shape and size, the wing can also be used for prone surfing on no wind days. The wing provides an incredible stability in white water which makes it easy to surf in small waves. It is for those looking for a pure surf feeling in a kite foil. When you like to use a small kite as often as possible, even in lighter wind conditions and you are looking for the same set up to surf on no wind days, the Spirit Surf is your weapon of choice
1250 Wing, 75cm mast

2022 North Scoop foilboard. Be blown away by the riding experience of this direct and responsive board with instant touchdown recovery. The Scoop allows you to connect through the intuitive concave deck for stable smooth transitions and easy steering, and delivers high performance foiling with a lightweight reinforced EPS core. In 2021 we’ve introduced a new ultra-lightweight yet durable hybrid carbon construction for increased stiffness, manoeuvrability and glide. A high-density structural PVC stringer system helps spread the load, while an ultra-lightweight double bamboo reinforcement layer adds greater impact resistance and rigidity. Touchdown recovery with new Deep-V bottom contours and bevelled rails, so it releases faster without sticking. The Scoop is your ideal expedition partner for comfortable long distance foil missions or an after work sundowner, and a trusted platform for strapped big wave tow-foiling – from Pe’ahi to your local 2ft beach break.

The goal with the Spirit Freeride foil is to find the perfect allround, multi-purpose hydrofoil setup. It’s a single-stroke wing in the sense that you will normally be flying after just a single power stroke from your kite and already maintains flight at lower speed. The Spirit back wing is big enough to give good pitch control at low speeds, but not too big to hold you back at the top end. Winglets offer good tracking and directional control. There ́s no better choice to start your foil freeride career than using the spirit freeride set up at an unbeatable price point.

Available in:
700 wing and a 60 mast, 75 mast or 90 mast

Optional length fuselage for the Axis Foil system.
Standard is 76cm
Short is 68cm
Ultra Short 62cm
Windsurf is windsurfing specific, placing the front wing much further ahead of the mast.

Axis rear hydrofoil wing.

A variety of size rear wings for different foil boarding applications

CF300 TAIL WING

Axis Foil top mount. You need this to attach your Axis foil to a board. 3 styles available, a Plate mount that uses 2 long boxes mounted in your board, a Surf Tuttle box and a Windsurf tuttle box. When in doubt just contact us for advice. The Tuttle mounts for windsurf and surf differ slightly in the spacing of the 2 bolt holes

Axis foil masts. Individual alloy masts of various lengths to suit Axis Foils.

Designed for the AXIS S-Series and K-Series Foils the AXIS masts are stiff, strong, and ready for any use and conditions. We designed our masts for 2019 to give our foilers a very direct feeling to their foil which is critical for foiling. We even sourced our own high quality aluminium and bought tons of it, to ensure we only have the highest quality raw materials for our foils. Our K/Series masts are 224% stiffer than the 15mm thick masts (most other foils on the market). It's even stiffer than any carbon mast on the market today. This gives you more control and fast input from your feet to the front wing.

Composite structure, thinner at the bottom thicker at the top for chord progression. Snappier feel in carbon verses aluminium.

Bolts for your Axis foil. There are surf and windsurf specific bolts for the different length mounts

Cabrinha FUSION FOIL KIT

HIGH PERFORMANCE - LIGHT WEIGHT

Select your construction then wings

Set includes: Mast, rear fuselage, travel bag, 5pcs m6 ss316 torx ti coated screws and torx tool. Wings and Wing covers

Sizes: 70 CM / 80CM

The all new Cabrinha Fusion foil system sets a new benchmark in Cabrinha's foil design & manufacturing capabilities. Performance & function is at the heart of the design process.

Each Individual part has been redesigned on both component and connection level with an option to interchange any part in the system. This effortlessly simple system puts complete customization in your hands and the new X:Series Wing options will open the door to progression on whatever craft you choose to use them with.

The Fusion Carbon kit puts performance above all else. The EPS, prepreg carbon construction gives insane stiffness in a lightweight package. It seamlessly integrates into all 9cm industry standard foil boxes. The redesigned fuselage connection platform allows the mast to tightly lock into place to withstand the vertical and horizontal forces involved in all foil disciplines.

DESIGN PROFILE

Ultimate stiffness to weight ratio and minimum drag.

MAST FEATURES

• Integrated baseplate for superior stiffness and reduced weight
• I-beam full carbon pre-preg construction.
• EPS core for superior strength to weight ratio
• Precision tapered fuse-to-mast connection for optimal rigidity
• Tapered chord for reduced drag
• 3-screw connection with threaded brass inserts

FUSELAGE FEATURES

• EPS core for superior strength to weight ratio
• Full carbon prepreg construction
• ss316 m6 inserts
• Interchangeable rear fuselage for optimal performance and easy travel
• 343mm rear fuse for superior maneuverability
• recessed stabilizer mounting surface for minimal drag

Cabrinha FUSION HYBRID Foil Kits

Set includes: Mast, rear fuselage, travel bag, 8pcs m6 ss316 torx ti coated screws and torx tool. Front and Rear Wings with Wing Covers

Sizes: 70 / 90 CM MAST

The all new Fusion ecosystem sets a new benchmark in Cabrinha's foil design & manufacturing capabilities. Performance & function is at the heart of the design process.

Each Individual part has been redesigned on both component and connection level with an option to interchange any part in the system. This effortlessly simple system puts complete customization in your hands and the new X:Series Wing options will open the door to progression on whatever craft you choose to use them with. We proudly invite you to build your dream ride...

The Fusion Hybrid is an efficient blend of premium components that result an incredibly rigid & hydrodynamic structure. It seamlessly integrates into all 9cm industry standard foil boxes

The redesigned fuselage connection platform allows the mast to tightly lock into place to withstand the vertical and horizontal forces involved in all foil disciplines.

DESIGN PROFILE

Durability, longevity and unmatched stiffness in an alloy setup.

MAST FEATURES

• Fixed top plate with m8 slots for easy mounting
• 3-screw connection for superior rigidity
• Aircraft grade extruded, anodized 6061-T6 aluminum
• Precision tapered fuse-to-mast connection for optimal rigidity
• Helicoil inserts minimizes corrosion and provides long lasting durability
• Water tight hollow design for optimal strength to weight ratio

FUSELAGE FEATURES

• Precision CNC machined aircraft grade, anodized 6061-T6 aluminum
• Helicoil inserts minimizes corrosion and provides long lasting durability
• Interchangeable rear fuselage for optimal performance and easy travel
• Sold with 343mm fuselage for superior maneuverability
• Sold as accessory: 416mm fuselage for a perfect balance of stability and ease of use
• Recessed stabilizer mounting surface for minimal drag

FUSION X-SERIES WINGS

HIGH PERFORMANCE

Sizes: X950 / X1300 / X1600 / X1950

The best part of the last 5 years has been the rise in hybrid development and crossover technology amongst sports. No where is this more evident than in foil boarding. The hydrofoil has become the common denominator in all of the surf and wind sports today.

Therefore, it reasons that its important to have a hydro wing-set capable of crossing between sporting genres with flawless performance and capability. Enter the X Series™ wings from Cabrinha. The design of the X Series™ recognizes and exploits the most important features needed in all hydrofoiling genres. Lift, efficiency and control are the three pillars that drive the X Series’ high performance and buttery smooth ride.

Through a combination of outlines and wing profiles the X series delivers a smooth lift and stable flight with precise turning and control.

The X Series’ efficiency is enhanced by our all new Cab Fusion mast and fuselage ecosystem. The Cab Fusion is a redesign from the bottom up to remove any unwanted ‘play’ in the system while streaming the connection between the wings and the fuselage. The resulting increase in stiffness and reduction in drag puts the X Series wings into an all new class of hydrofoils.

The X Series comes in 4 sizes to cover an incredibly wide range of rider weights and uses. If you do more than one sport you'll be confident that your entire foil system will crossover with an astounding level of performance across genres.

DESIGN PROFILE

Swept LE, Straight TE, Lean draft forward profile, moderate anhedral.

WING FEATURES

• Loose and agile feel for superior maneuverability
• Optimal efficiency and lift
• Integrated fuselage with tapered fit
• Incredible torsional stiffness and minimum drag
• Full prepreg carbon construction
• EPS core for superior strength to weight ratio
• Moderate anhedral for a more efficient lift platform
• Draft forward profile for a forgiving ride and early predictable lift

TECH SPECS

• X950- 950cm^2, WS 630mm, AR 4.2, Vol 1.18L
• X1300- 1300cm^2, WS 780mm, AR 4.7, Vol 1.6L
• X1600- 1600cm^2 WS 900mm, AR 5.05, Vol 2L
• X1950- 1950 cm^2, WS 1000mm, AR 5.13, Vol 2.5L

Put your Axis Foil together the way you want it. Choose your front wing, rear wing, mast length, doodad to attach the alloy mast to the fuselage (not needed for carbon masts), fuselage size and mounting system.

SP (Surf Performance)

BSC (Broad Spectrum Carve)

HPS (High Performance Speed)

PNG (Pump and Glide)