Surfboard Fins

Longboard screw and plate to secure longboard centre fin into box

Designed for radical, progressive surfing. The raked side fins produce exceptional speed and drive, while the smaller centre fin offers quick release through turns.
IDEAL CONDITIONS
Hollow steep waves, punchy beach breaks.
BOARD TYPES
Performance boards with deep concaves and moderate-to-extreme rocker.

SMALL Yellow (55Kg - 70 Kg)
FIN SPECS
Base: 4.37" 111.0mm
Depth: 4.37" 111.0mm
Area: 13.71"² / 8846mm²
Sweep: 35.5°
Foil: Flat

MEDIUM Orange (65Kg - 80 Kg)

FIN SPECS

SIDE:
Base: 4.55" / 116mm
Depth: 4.52" / 115mm
Area: 14.89"² / 9608mm²
Sweep: 36.6º
Foil: Flat

CENTRE:
Base: 4.37" / 111mm
Depth: 4.37" / 111mm
Area: 13.71"² / 8846mm²
Sweep: 35.5º
Foil: Flat

LARGE Blue (75Kg - 90Kg)
FIN SPECS

SIDE:
Base:4.61" / 117mm
Depth: 4.70" / 119mm
Area: 15.63"² / 10083mm²
Sweep: 36.3º
Foil: Flat

CENTRE:
Base: 4.47" / 114mm
Depth: 4.45" / 113mm
Area: 14.68"² / 9469mm²
Sweep: 38.6º
Foil: Flat

• Elongated fin for performing long arc turns.
• High degree of sweep angle provides exceptional control off the bottom and when carving on the open face.
• Designed for power surfers who like to push hard against their fins and draw out their turns.
IDEAL CONDITIONS
Open face, down-the-line waves, particularly good in point and reef breaks.
BOARD TYPES
Recommended for boards with deep concaves and moderate-to-extreme rocker.
Please Note: this fin is designed to be used exclusively with the FCS II Fin System, and will not fit in the traditional FCS Dual Plug System.

MEDIUM (65Kg - 80Kg)
LARGE (75Kg - 90Kg)

FIN SPECS: MEDIUM

Base: 4.47" / 113mm
Depth: 4.54" / 115mm
Area: 14.96"² / 9650mm²
Sweep: 37.0º
Foil: Flat

FIN SPECS: LARGE

Base: 4.58" / 116mm
Depth: 4.66" / 118mm
Area: 15.73"² / 10150mm²
Sweep: 37.0º
Foil: Flat

FCS Surfboard Fin Case

• Durable and lightweight construction, with water and abrasion resistance
• Holds 4 sets of fins
• Accordion style design with soft internal dividers.
• ​Can also be used to store fin keys, wax and spare screws
• (fins shown in image not included)

• OVERVIEW: Oversized, all-round fin for a diverse range of surfers.
• GEOMETRY: Functional template with flat foil on the side fins delivering fast, controlled directional changes.
• FIN MATERIAL: NEO Glass
• PERFORMANCE: Designed for surfers who like to attack the wave and surf with energy and power on critical parts of the wave.
• CONDITIONS: A wide range of conditions, particularly good in critical overhead waves.
• BOARD TYPES: Recommended for all board types.

Al Merrick's template is designed for radical, progressive surfing. The raked side fins produce exceptional speed and drive, while the smaller centre fin on the medium and large template offer quick release through turns.
IDEAL CONDITIONS
Hollow steep waves, punchy beach breaks.
BOARD TYPES
Performance boards with deep concaves and moderate-to-extreme rocker.
Please Note: this fin is designed to be used exclusively with the FCS II Fin System, and will not fit in the traditional FCS Dual Plug System

FIN SPECS: SMALL Yellow

Base: 4.37" / 111mm
Depth: 4.37" / 111mm
Area: 13.71"² / 8846mm²
Sweep: 35.5º
Foil: Flat

FIN SPECS: MEDIUM Red

SIDE
Base: 4.55" / 116mm
Depth: 4.52" / 115mm
Area: 14.89"² / 9608mm²
Sweep: 36.6º
Foil: Flat

CENTRE
Base: 4.34" / 110mm
Depth: 4.41" / 112mm
Area: 13.72"² / 8852mm²
Sweep: 35.0º

FIN SPECS: LARGE Blue

SIDE
Base: 4.61" / 117mm
Depth: 4.70" / 119mm
Area: 15.63"² / 10083mm²
Sweep: 36.3º
Foil: Flat

CENTRE
Base: 4.47" / 113mm
Depth: 4.45" / 113mm
Area: 14.68"² / 9469mm²
Sweep: 38.6º

FEATURES:

• Style: Longboard single fin
• Size: 9 inch
• Christenson signature fin
• Suitable for longboards
• FCS II fin system
• Performance Glass (PG) fins are machine cut from layers of solid fiberglass
• These fins are stiff and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations

Just snap it in and out easily for transport and storage.

OVERVIEW: Versatile, all-round fin for modern longboarding.
GEOMETRY: Neutral, well balanced template with balanced curves and progressive tip flex.
FIN MATERIAL: Glass Flex
PERFORMANCE: Offers a combination of drive, speed and response for modern longboarding. Seamlessly connect turns and move up and down the board.
CONDITIONS: A wide range of conditions from beach breaks to point breaks
BOARD TYPES: Suits most LB's with hard edges. Will fit most existing FCS LB boxes. No new box required.

FCS Single longboard fin

Assorted colors. contact us for availibility

• Neutral, well balanced template.

• Versatile, high performance Longboard (LB) fin for all conditions. 

• Offers a combination of drive, speed and response for modern longboarding.

• Turn and Connect: Seamlessly connect turns and move up and down the board.

• 2 + 1 Compatible.

• Two Quad Rear Side Byte fins designed to add speed, stability and control to any 2 + 1 set up. 
• Neutral, well balanced template.

Ideal Conditions

• A wide range of conditions from beach breaks to point breaks.

Board Types

• Designed to fit the FCS II Fin System.
• Suitable for longboards, SUP's or as shortboard quad rears.

Filipe Toledo's ultra-light medium signature fin for fast, aerial style surfing.
GEOMETRY: Combines the drawn out influences of a more raked fin with the all-round versatility of a neutral template such as the FCS II Performer.
FIN MATERIAL: Ultra-Light Performance Core
PERFORMANCE: Delivers exceptional drive and control off the bottom without hampering speed off the top and release through the lip for fast aerial surfing.
CONDITIONS: A wide range of conditions, particularly good in critical overhead waves.
BOARD TYPES: Performance shortboards and hybrid models.

FCS II KA Thruster tri fin set

• 2 colors avalible. contact us to see what we have
• OVERVIEW: Kolohe Andino's large signature fin for performing fast, explosive turns.
• GEOMETRY: All-round fin with flat foil delivers a lively mix of drive, pivot and tail release for performing fast, explosive turns and airs on and above the wave.
• FIN MATERIAL: Performance Core
• PERFORMANCE: Ideal for surfers wanting a reliable, all-round fin who like to push a little harder and break quickly out of a turn with control.
• CONDITIONS: A wide range of conditions, particularly good in critical overhead waves.
• BOARD TYPES: Performance shortboards and hybrid models.

Oversized, all-round fin for a diverse range of surfers.
• Functional template with flat foil on the side fins delivering fast, controlled directional changes.
• Designed for surfers who like to attack the wave and surf with energy and power on critical parts of the wave.
IDEAL CONDITIONS
A wide range of conditions, particularly good in critical overhead waves.
BOARD TYPES
Recommended for all board types.
Please Note: this fin is designed to be used exclusively with the FCS II Fin System, and will not fit in the traditional FCS Dual Plug System.

SMALL (55Kg - 70Kg)
MEDIUM (65Kg - 80Kg)
LARGE (75Kg - 90Kg)

MORE INFO
FIN SPECS: SMALL

Base: 4.28" / 109mm
Depth: 4.47" / 113mm
Area: 14.51"² / 9360mm²
Sweep: 33.7º
Foil: Flat

FIN SPECS: MEDIUM

Base: 4.39" / 111mm
Depth: 4.58" / 116mm
Area: 15.28"² / 9860mm²
Sweep: 33.7º
Foil: Flat

FIN SPECS: LARGE

Base: 4.50" / 114mm
Depth: 4.70" / 119mm
Area: 16.06"² / 10360mm²
Sweep: 33.7º
Foil: Flat

Mick's fin has a dynamic flex pattern offering bursts of speed. Ideal for power surfers who like to snap hard off the top and carve long roundhouse cutbacks, this fin provides maximum drive.
IDEAL CONDITIONS
Open face, down-the-line waves, particularly good in point and reef breaks.
BOARD TYPES
Performance boards with deep concaves and moderate-to-extreme rocker.
Please Note: this fin is designed to be used exclusively with the FCS II Fin System, and will not fit in the traditional FCS Dual Plug System.

MEDIUM (65Kg - 80 Kg) -Blue
LARGE (75Kg - 90 Kg) -Black

FIN SPECS
MEDIUM (Blue):
Base: 4.35" / 110mm
Depth: 4.50"/ 114mm
Area: 14.62"² / 9434mm²
Sweep: 36.0°
Foil: Flat

LARGE (Black):
Base: 4.49″ / 114.0mm
Depth: 4.67″ / 119mm
Area: 15.70″² / 10131mm²
Sweep: 36.0°
Foil: Flat

• Mark Richard's famous twin template produces exceptional drive and speed.
• The small stabilizer (centre fin) adds control whilst maintaining the freedom and manoeuvrability of a twin fin set up.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for all board types including fish, funboard and twin fin boards

• Assorted colors so contact us for availibity
• Mark Richard's famous twin template produces exceptional drive and speed.
• The small stabilizer (centre fin) adds control whilst maintaining the freedom and manoeuvrability of a twin fin set up.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for all board types including fish, funboard and twin fin boards

The FCS II Performer Neo Glass is designed for a balance of speed, flow & response. It's also well proportioned template with Inside Foil Technology (IFT) and Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns. The FCS II Performer Neo Glass Quad set containing 4 fins and a wide range of conditions from beach breaks to point breaks. Designed to fit the FCS II Fin System the FCS II Performer Neo Glass are recommended for all board types.

Overview

• Designed for a balance of speed, flow & response.
• Well proportioned template with Inside Foil Technology (IFT).
• Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
• Quad (4 fin) setup.

Ideal Conditions

• A wide range of conditions from beach breaks to point breaks.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for all board types.

Fin Family

• Performer: Find Balance. A balance of speed, flow & response.

OVERVIEW
• Reliable all-round fin for a diverse range of surfers, conditions and board types.
• Well proportioned template with Inside Foil Technology (IFT) delivering a balance of drive, pivot and hold.
• Designed for surfers wanting a combination of speed and maneuverability with flow between turns.
IDEAL CONDITIONS
A wide range of conditions from beach breaks to point breaks.
BOARD TYPES
Recommended for all board types.
Please Note: this fin is designed to be used exclusively with the FCS II Fin System, and will not fit in the traditional FCS Dual Plug System.

X-SMALL (Under 55Kg)
SMALL (55Kg - 70Kg)
MEDIUM (65Kg - 80Kg)
LARGE (75Kg - 90Kg)
FIN SPECS: X-SMALL

Base: 4.13" / 105mm
Depth: 4.30" / 109mm
Area: 13.26"² / 8554mm²
Sweep: 33.7º
Foil: Inside
FIN SPECS: SMALL

Base: 4.25" / 108mm
Depth: 4.43" / 112mm
Area: 14.03"² / 9054mm²
Sweep: 33.7º
Foil: Inside

FIN SPECS: MEDIUM

Base: 4.37" / 111mm
Depth: 4.55" / 115mm
Area: 14.81"² / 9554mm²
Sweep: 33.7º
Foil: Inside

FIN SPECS: LARGE

Base: 4.48" / 114mm
Depth: 4.67" / 118mm
Area: 15.58"² / 10054mm²
Sweep: 33.7º
Foil: Inside

• Fast reacting fin for performing tight radius turns.
• Upright template with flat foil on the side fins allows for acute directional changes.
• Designed for surfers who like to stay tight in the pocket and perform aerial maneuvers.
IDEAL CONDITIONS
Suits hollow waves and punchy beach breaks.
BOARD TYPES
Recommended for performance shortboards with moderate-to-low rocker.
Please Note: this fin is designed to be used exclusively with the FCS II Fin System, and will not fit in the traditional FCS Dual Plug System

MEDIUM (65Kg - 80 Kg)

FIN SPECS: MEDIUM

Base: 4.34" / 110mm
Depth: 4.57" / 116mm
Area: 14.96"² / 9650mm²
Sweep: 31.9º
Foil: Flat

Full-bodied template providing a stable and predictable feel.

Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.

Overview

• Low sweep (rake) allows for tight controlled turns

• Ideal for performance single fins and bonzer models.

The FCS GL1 Quad SUP Fin Set is a super fun template for speedy lines and quick pivotal turns that will always have you ready for the next section. Gerry Lopez's signature quad set has a low sweep angle across all four fins combined with a 50/50 foil on the rear fins which provides pivotal control when driving through turns, and flow on the open face. The GL1 has been popular with paddlers and surfers alike as they are extra large fins that love full power and complement those who like to push hard against their fins.

Features

• Size: Large
• Fins in set: 4
• Material: Performance Core

Tech Specs

FRONTS

• Base: 3.98 in, 101 mm
• Depth: 4.75 in, 120 mm
• Area: 14.41 sq in, 9300 sq mm
• Sweep: 32.5°
• Foil: Flat

REARS

• Base: 3.64" / 92mm
• Depth: 4.13″ / 105mm
• Area: 11.03″² / 7115mm²
• Sweep: 30.8°
• Foil: 50/50

• Inspired by the height of Australian old mals in the mid 60's, this fin incorporates the perfect amount of release and drive for turns along with plenty of hold for nose rides.

• "I have tried a lot of fins and this is the best combination of every element in one fin. A touch of flex in the tip but not too much so it doesn't get the doughy feeling that really flexible fins can give at times." - Thomas Bexon.

• Contact us for colour availability

• FCS II Tab Infill Kit
• For use with original FCS Dual Tab fins in the FCS II plugs.
• 1 x FCS Key
• 1 x Centre Plug Infill.
• 4 x Side Plug Infills
• 10 x Screws.

Single fin

Developed by Sean Mattison for Von Sol surfboards, the FCS VS KNUBSTER is essentially a centre fin that can be added to any quad set-up. The fin will increase drive and provide directional control through turns, without sacrificing speed, flow, or the freedom of movement typically associated with a quad.

The “KNUBSTER” is designed with a single tab that allows the fin to be positioned in the forward and rear centre plug to cater for the individual drive requirements of each surfer.

Adding the FCS VS KNUBSTER to your quad set-up is an affordable way to add a new dimension to your surfing.

The FCS VS KNUBSTER, which is 3 3/4” by 2” high, was the 5th fin Kelly Slater used in his boards during the Quiksilver Pro in New York. According to Kelly’s report, “The KNUBSTER makes your quad set-up feel faster, smoother, and it adds a little more control. It just tightens everything it up a bit”.

Use this to fit your 2 tab fins to a longboard style (US Style) fin box.

medium all-round template for a variety of surfing styles, conditions and board types.
GEOMETRY: Balanced outline with smooth curves, neutral sweep and Inside Foil Technology (IFT) providing a consistent feel in a variety of conditions.
FIN MATERIAL: Glass Flex.
PERFORMANCE: Provides a balance of drive, speed and flow for performing turns in the pocket or on the open face.
CONDITIONS: A wide range of conditions from beach breaks to point breaks.
BOARD TYPES: Recommended for all board types.

Large all-round template for a variety of surfing styles, conditions and board types.
GEOMETRY: Balanced outline with smooth curves, neutral sweep and Inside Foil Technology (IFT) providing a consistent feel in a variety of conditions.
FIN MATERIAL: Glass Flex.
PERFORMANCE: Provides a balance of drive, speed and flow for performing turns in the pocket or on the open face.
CONDITIONS: A wide range of conditions from beach breaks to point breaks.
BOARD TYPES: Recommended for all board types.

Overview

• A balance of speed, flow and response in a variety of conditions.
• Lightweight performance fin with responsive tip flex and hydrodynamic foil on the side fins.
• Neutral all-round template with Inside Foil Technology (IFT).

Ideal Conditions

• A wide range of conditions from beach breaks to point breaks.

Board Types

• All board types.
• Will fit the FCS II Fin System when used with grub screws and the FCS Infill Kit.

Designed for fast, critical surfing. The upright, pivotal side fin template produces quick start-up acceleration and allows for tight turns in the pocket.
IDEAL CONDITIONS
Hollow steep waves, punchy beach breaks.
BOARD TYPES
Performance boards with deep concaves and moderate-to-extreme rocker.

MEDIUM (65Kg - 80Kg)
FIN SPECS

Base: 4.33" / 110mm
Depth: 4.53" / 115mm
Area: 15.23"² / 9824mm²
Sweep: 32°
Foil: Flat

The Performance 7” Thermotech, utilizes an all-around template shape and can be used as a stand-alone center fin, or combined with side bites to be used as a 2 +1. Made in Huntington Beach, Thermotech fins do not have the traditional plastic feel of a composite fin. Instead, they have a consistent flex that creates drive and release through turns. Thermotech fins come with the Futures Truss Base, making them lighter and stronger.

The Performance 8” Thermotech, utilizes an all-around template shape and can be used as a stand-alone center fin, or combined with side bites to be used as a 2 +1. Made in Huntington Beach, Thermotech fins do not have the traditional plastic feel of a composite fin. Instead, they have a consistent flex that creates drive and release through turns. Thermotech fins come with the Futures Truss Base, making them lighter and stronger.

The DHD HC, designed by Australian shaper Darren Handley of DHD Surfboards, is a honeycomb thruster in the Rake template category. The honeycomb construction offers a balanced flex pattern. The swept back shape provides more drive and hold through turns, ideal for a high-performance approach. “Having worked with our elite team riders on this fin template for a number of years we are stoked to release a fin with Futures that will compliment our boards and improve your performance in the surf.” -Darren Handley

Thermo tech
Small (47kg - 70kg)
Side Fins - H 4.37 B 4.22 A 14.22
Centre Fin - H 4.37 B 4.22 A 14.22
Thermotech fins do not have the traditional plastic feel of a composite fin. Instead they have a consistent flex that creates drive and release through turns. Thermotech fins come with the Futures Truss Base, making them lighter and stronger.

The Futures F6 Alpha is a medium sized thruster in the Neutral template category. Made in Huntington Beach, the Alpha product line now combines Bureo’s NetPlus recycled fishing nets with Futures’ Compound 6 (C6) carbon and air infused technology. The responsive flex characteristics of C6 combine with the neutral Legacy Series template to create one of the most exciting new products on the market.

• Template Category | Neutral (balanced, all-around)
• Construction | Alpha (NetPlus)
• Ride Number | Balanced – 6.8
• Size | Medium (63 - 88 kgs)

The F6 Legacy Series Quad is a medium sized set in the Neutral template category. The honeycomb construction gives a balanced feel for all-around performance. The rear fins are QD2 4.0 with Symmetrical foil.

• Template Category | Neutral (balanced, all-around)
• Construction | Honeycomb
• Ride Number | Balanced – 4.9 
• Size | Medium Quad

Thermo tech
Medium (65kg - 88kg)
Side Fins - H 4.56 B 4.35 A 15.12
Centre Fin - H 4.56 B 4.35 A 15.12
Thermotech fins do not have the traditional plastic feel of a composite fin. Instead they have a consistent flex that creates drive and release through turns. Thermotech fins come with the Futures Truss Base, making them lighter and stronger.

The F8 Alpha is a large sized thruster in the Neutral template category. Made in Huntington Beach, the Alpha product line now combines Bureo’s NetPlus recycled fishing nets with Futures’ Compound 6 (C6) carbon and air infused technology. The responsive flex characteristics of C6 combine with the neutral Legacy Series template to create one of the most exciting new products on the market.

• Template Category | Neutral (balanced, all-around)
• Construction | Alpha (NetPlus)
• Ride Number | Balanced – 6.2
• Size | Large (80+ kgs)

Thermo tech
Large (80kg+)
Side Fins - H 4.64 B 4.47 A 15.90
Centre Fin - H 4.64 B 4.47 A 15.90
Thermotech fins do not have the traditional plastic feel of a composite fin. Instead they have a consistent flex that creates drive and release through turns. Thermotech fins come with the Futures Truss Base, making them lighter and stronger.

The Futures HS2 Generation Series, designed by Hayden Cox of Haydenshapes, is a medium size Speed Generating fin with a Ride Number of 8.3. The latest in speed generating fins, the Gen Series features a V2 foil for fluidity and a unique blend of uni-directional carbon and fiberglass for a more stable flex pattern. Similar feel to Blackstix, but a bit more subtle for those just transitioning onto foiled fins.

• Carbon/Fiberglass
• Medium (65kg - 88kg)
• Ride Number 8.3
• Side Fins - H 4.45 B 4.45 A 14.54
• Centre Fin - H 4.45 B 4.45 A 14.54

Medium tri fin

The John John Florence Alpha is a medium sized thruster in the Neutral template category. It is the same template that JJF rode to back-to-back World Championships in and that has been a global best seller in Techflex construction, since the initial release. Made in Huntington Beach, the Alpha product line now combines Bureo’s NetPlus recycled fishing nets with Futures’ Compound 6 (C6) carbon and air infused technology.

• Template Category | Neutral (balanced, all-around)
• Construction | Alpha (NetPlus)
• Ride Number | Balanced – 5.9
• Size | Medium (145 – 195 lbs)

• Thermo tech
• Rear Fins - H 3.76 B 3.71 A 10.73
• Thermotech fins do not have the traditional plastic feel of a composite fin. Instead they have a consistent flex that creates drive and release through turns. Thermotech fins come with the Futures Truss Base, making them lighter and stronger.

Co-designed with one of the world's best free surfers, this V2 quad set was created for high performance surfing. These fins are made with renewable bamboo, which provides a lively flex pattern, and are wrapped in symbolic art provided by Rasta. A medium sized template that performs in a variety of conditions. The Quad set up with a medium base and tip allow you to generate more drive and stay on rail.

A portion of the proceed of the Rasta Quad will be donated to the Dave's non-profit organization, Surfers For Cetaceans.

Front Fins:

Height: 4.44 in,     11.28 cm
Base:   4.31 in,     10.95 cm
Area:  14.72 sq in, 94.97 sq cm

Rear Fins:

Height: 3.79 in,     9.63 cm
Base:   3.78 in,     9.60 cm
Area:  11.03 sq in, 71.16 sq cm