SUP Fins

This fin is ideal for flat water exploration on lakes and inland waterways, yet it will also perform well in small surf conditions. Streamlined design offers quick maneuverability and turning, and the seamless leading edge shed weed quickly.
FCS II TOOL-LESS SUP FINS
• The fin can be inserted, removed or adjusted in seconds.
• No screw and plate required.
• Fits a variety of existing single fin boxes.

Designed for radical, progressive surfing. The raked side fins produce exceptional speed and drive, while the smaller centre fin offers quick release through turns.
IDEAL CONDITIONS
Hollow steep waves, punchy beach breaks.
BOARD TYPES
Performance boards with deep concaves and moderate-to-extreme rocker.

SMALL Yellow (55Kg - 70 Kg)
FIN SPECS
Base: 4.37" 111.0mm
Depth: 4.37" 111.0mm
Area: 13.71"² / 8846mm²
Sweep: 35.5°
Foil: Flat

MEDIUM Orange (65Kg - 80 Kg)

FIN SPECS

SIDE:
Base: 4.55" / 116mm
Depth: 4.52" / 115mm
Area: 14.89"² / 9608mm²
Sweep: 36.6º
Foil: Flat

CENTRE:
Base: 4.37" / 111mm
Depth: 4.37" / 111mm
Area: 13.71"² / 8846mm²
Sweep: 35.5º
Foil: Flat

LARGE Blue (75Kg - 90Kg)
FIN SPECS

SIDE:
Base:4.61" / 117mm
Depth: 4.70" / 119mm
Area: 15.63"² / 10083mm²
Sweep: 36.3º
Foil: Flat

CENTRE:
Base: 4.47" / 114mm
Depth: 4.45" / 113mm
Area: 14.68"² / 9469mm²
Sweep: 38.6º
Foil: Flat

Single fin

Developed by Sean Mattison for Von Sol surfboards, the FCS VS KNUBSTER is essentially a centre fin that can be added to any quad set-up. The fin will increase drive and provide directional control through turns, without sacrificing speed, flow, or the freedom of movement typically associated with a quad.

The “KNUBSTER” is designed with a single tab that allows the fin to be positioned in the forward and rear centre plug to cater for the individual drive requirements of each surfer.

Adding the FCS VS KNUBSTER to your quad set-up is an affordable way to add a new dimension to your surfing.

The FCS VS KNUBSTER, which is 3 3/4” by 2” high, was the 5th fin Kelly Slater used in his boards during the Quiksilver Pro in New York. According to Kelly’s report, “The KNUBSTER makes your quad set-up feel faster, smoother, and it adds a little more control. It just tightens everything it up a bit”.

Just snap it in and out easily for transport and storage.

OVERVIEW: Versatile, all-round fin for modern longboarding.
GEOMETRY: Neutral, well balanced template with balanced curves and progressive tip flex.
FIN MATERIAL: Glass Flex
PERFORMANCE: Offers a combination of drive, speed and response for modern longboarding. Seamlessly connect turns and move up and down the board.
CONDITIONS: A wide range of conditions from beach breaks to point breaks
BOARD TYPES: Suits most LB's with hard edges. Will fit most existing FCS LB boxes. No new box required.

Use this to fit your 2 tab fins to a longboard style (US Style) fin box.

Mick's fin has a dynamic flex pattern offering bursts of speed. Ideal for power surfers who like to snap hard off the top and carve long roundhouse cutbacks, this fin provides maximum drive.
IDEAL CONDITIONS
Open face, down-the-line waves, particularly good in point and reef breaks.
BOARD TYPES
Performance boards with deep concaves and moderate-to-extreme rocker.
Please Note: this fin is designed to be used exclusively with the FCS II Fin System, and will not fit in the traditional FCS Dual Plug System.

MEDIUM (65Kg - 80 Kg) -Blue
LARGE (75Kg - 90 Kg) -Black

FIN SPECS
MEDIUM (Blue):
Base: 4.35" / 110mm
Depth: 4.50"/ 114mm
Area: 14.62"² / 9434mm²
Sweep: 36.0°
Foil: Flat

LARGE (Black):
Base: 4.49″ / 114.0mm
Depth: 4.67″ / 119mm
Area: 15.70″² / 10131mm²
Sweep: 36.0°
Foil: Flat

• Assorted colors so contact us for availibity
• Mark Richard's famous twin template produces exceptional drive and speed.
• The small stabilizer (centre fin) adds control whilst maintaining the freedom and manoeuvrability of a twin fin set up.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for all board types including fish, funboard and twin fin boards

• Mark Richard's famous twin template produces exceptional drive and speed.
• The small stabilizer (centre fin) adds control whilst maintaining the freedom and manoeuvrability of a twin fin set up.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for all board types including fish, funboard and twin fin boards

FCS Single longboard fin

Assorted colors. contact us for availibility

• Neutral, well balanced template.

• Versatile, high performance Longboard (LB) fin for all conditions. 

• Offers a combination of drive, speed and response for modern longboarding.

• Turn and Connect: Seamlessly connect turns and move up and down the board.

• 2 + 1 Compatible.

• Two Quad Rear Side Byte fins designed to add speed, stability and control to any 2 + 1 set up. 
• Neutral, well balanced template.

Ideal Conditions

• A wide range of conditions from beach breaks to point breaks.

Board Types

• Designed to fit the FCS II Fin System.
• Suitable for longboards, SUP's or as shortboard quad rears.

Longboard screw and plate to secure longboard centre fin into box

The FCS II Harley Quad fins are a tru performance longboard quad fin setup

• OVERVIEW: Harley Ingleby's high performance longboard quad set.
• GEOMETRY: XL side fin template with full base, high sweep and narrow tip. Paired with Performer Small side fins for quad rear.
• FIN MATERIAL: Performance Core
• PERFORMANCE: Delivers maximum manoeuvrability, response and drive for surfers who like to perform agreesive turns on a longboard.
• CONDITIONS: A wide range of conditions, particularly good in critical overhead waves.
• BOARD TYPES: Suitable for performance longboards, surf SUP's and hybrids.

FCS II Christenson Twin PG Black are Great Twin Fins designed by Christenson.

• FCS II Tab Infill Kit
• For use with original FCS Dual Tab fins in the FCS II plugs.
• 1 x FCS Key
• 1 x Centre Plug Infill.
• 4 x Side Plug Infills
• 10 x Screws.

The Ocean & Earth Whip Thruster fin is for Whippy turns in the pocket and sliding the tail for lighter more agile surfers.

 Construction: Honeycomb

Flex: More flex (whipper response) for the light, more agile surfers.

Ideal Waves: All types but best in beach breaks.

Thruster: Predictable / Control used in the majority of boards ideal in all conditions.

Small: Height 109mm X Base 108mm

Medium: Height 120mm X Base 112mm

Large: Height 120mm X Base 112mm

The FCS DCandice Appleby SUP race fin is designed by renowned SUP water woman Candice Appleby. Stiff and lightweight carbon skin UL construction. Ideal race fin.

the rear 2 fins to make a quad

4.15" high

Short and powerful, the Sprint is a Hi-Performance fin ready to reach maximum speed on your racing board. It comes in 4 sizes. Construction is MFC Hi-Technology Molded Carbon Foam-Core with a weight of 135gr (4.76oz) for the Sprint 5 and 120gr (4.25oz) for the Sprint 4. Kai Lenny, together with the MFC Sprint, is the 2013 Racing World Champion, and 2013 & 2014 Battle Of the Paddle Champion.

• Elongated fin for performing long arc turns.
• High degree of sweep angle provides exceptional control off the bottom and when carving on the open face.
• Designed for power surfers who like to push hard against their fins and draw out their turns.
IDEAL CONDITIONS
Open face, down-the-line waves, particularly good in point and reef breaks.
BOARD TYPES
Recommended for boards with deep concaves and moderate-to-extreme rocker.
Please Note: this fin is designed to be used exclusively with the FCS II Fin System, and will not fit in the traditional FCS Dual Plug System.

MEDIUM (65Kg - 80Kg)
LARGE (75Kg - 90Kg)

FIN SPECS: MEDIUM

Base: 4.47" / 113mm
Depth: 4.54" / 115mm
Area: 14.96"² / 9650mm²
Sweep: 37.0º
Foil: Flat

FIN SPECS: LARGE

Base: 4.58" / 116mm
Depth: 4.66" / 118mm
Area: 15.73"² / 10150mm²
Sweep: 37.0º
Foil: Flat

• Elongated fin for performing long arc turns.
• High degree of sweep angle provides exceptional control off the bottom and when carving on the open face.
• Designed for power surfers who like to push hard against their fins and draw out their turns.
IDEAL CONDITIONS
Open face, down-the-line waves, particularly good in point and reef breaks.
BOARD TYPES
Recommended for boards with deep concaves and moderate-to-extreme rocker.
Please Note: this fin is designed to be used exclusively with the FCS II Fin System, and will not fit in the traditional FCS Dual Plug System.

MEDIUM (65Kg - 80Kg)
LARGE (75Kg - 90Kg)

FIN SPECS: MEDIUM

Base: 4.47" / 113mm
Depth: 4.54" / 115mm
Area: 14.96"² / 9650mm²
Sweep: 37.0º
Foil: Flat

FIN SPECS: LARGE

Base: 4.58" / 116mm
Depth: 4.66" / 118mm
Area: 15.73"² / 10150mm²
Sweep: 37.0º
Foil: Flat

Al Merrick's template is designed for radical, progressive surfing. The raked side fins produce exceptional speed and drive, while the smaller centre fin on the medium and large template offer quick release through turns.
IDEAL CONDITIONS
Hollow steep waves, punchy beach breaks.
BOARD TYPES
Performance boards with deep concaves and moderate-to-extreme rocker.
Please Note: this fin is designed to be used exclusively with the FCS II Fin System, and will not fit in the traditional FCS Dual Plug System

FIN SPECS: SMALL Yellow

Base: 4.37" / 111mm
Depth: 4.37" / 111mm
Area: 13.71"² / 8846mm²
Sweep: 35.5º
Foil: Flat

FIN SPECS: MEDIUM Red

SIDE
Base: 4.55" / 116mm
Depth: 4.52" / 115mm
Area: 14.89"² / 9608mm²
Sweep: 36.6º
Foil: Flat

CENTRE
Base: 4.34" / 110mm
Depth: 4.41" / 112mm
Area: 13.72"² / 8852mm²
Sweep: 35.0º

FIN SPECS: LARGE Blue

SIDE
Base: 4.61" / 117mm
Depth: 4.70" / 119mm
Area: 15.63"² / 10083mm²
Sweep: 36.3º
Foil: Flat

CENTRE
Base: 4.47" / 113mm
Depth: 4.45" / 113mm
Area: 14.68"² / 9469mm²
Sweep: 38.6º