Well, never thought we'd see the day we'd tell you a 4'8" softboard could be the most versatile in your quiver.

The Mullet Fat Cat was designed purely to make small waves fun again. It is based on the theory of a "planing hull" and is similar to a Mini Simmons style template. This means you can get exceptional down the line speed off the weakest of sections. Combined with the twin keel fins, this makes it the ideal board for spinning and sliding through sloppy summer waves or long weak point breaks. Goes pretty good finless too!

What if the waves get hollow? No problems. This shape now seems to be our team riders go-to board for slabby waves, whether its perfect 4 foot peaks, or a 2 foot close-out shoreys. Putting your foot on the inside peg of the crescent tail gives plenty of hold when required, while the shorter length allows it to easily fit in the curve of smaller hollower waves. Being kinda bulky up front means you don't lose any paddle power either.

If that's not enough, we have even had people use it for bodyboarding, kneeboarding, kitesurfing, skimboarding, sandboarding, wake surfing & foiling. Let us know if there's anything to add to the list.

To top it off, it's not gunna snap, and it's not going to hurt you, so no excuses for holding back!

Best thing about the Fat Cat - As its not a traditional shape, its hard to take yourself too seriously when riding a Fat Cat. So, whatever conditions you choose to ride your Fatty in, or whether your surfing good or bad, we guarantee it'll be the board you have the most fun on. 

Fat Cat is ideal for riders up to 85kg.

Core: Moulded Fusion X (EPS) 
Deck: 10lb PE
Slick: Xtra Duralinx
Tail: Clipped Crescent
Stringer: 2 X Fibreglass Reinforced Bamboo Stringers
Fins: Keel Twin Fin (Fins Included)

This

Call for Colours 07 55313199

This year we have introduced a new model to the Mullet Range - the Bean Stalk.

This is a board that pretty much anyone can have a crack on, no matter what your skill level.

Our whole aim at Mullet is to keep surfing fresh, and produce boards to get you out there more often.

With this in mind, this time round we’ve gone bigger than our usual offerings. Using a traditional Mini Mal shape, the Bean Stalk is guaranteed to have you hogging line ups and catching more waves than anyone no matter how small or weak the waves are.

We also found there was a bit of a gap in our range for the beginner to intermediate surfer, so if that’s where you’re at, this is the board that will have you ripping sooner rather than later!

Shape-wise, these templates have a bit of extra volume in the nose, so they paddle like a rocket and you’re guaranteed to be catching plenty of waves. Once you’re on your feet, they are extremely stable, but still refined enough through the rails you can put them through some turns.

At the back-end, we’ve kept it pretty straight forward with the traditional thruster set-up as standard. If you’re after a bit of variety, it also goes good with a set of twin keels or finless.

Bean Stalk is ideal for advanced riders all rider sizes although if you’re just getting started a 7’0 would be best suited to beginners up to 70kg.

Core: Moulded Fusion X (EPS)
Deck: 10lb PE
Slick: Xtra Duralinx
Tail: Square Tail
Stringer: 2 X Fibreglass Reinforced Bamboo Stringers
Fins: Thruster Fin Set-Up (Fins Included)

Funnest pieces of foam getting around town.

1. 10lb PE Deck - Deck skin providing perfect amount of strength, durability and traction.

2. Exo-skeletal Membrane (ESM) - A unique layer fused between the EPS core and the deck / slick materials to provide extra strength, durability and impact absorbtion.

3. EPS Core - 100% Waterproof. Light in weight, however provides ultimate strength and durability.

4. Bamboo Stringer Technology (BST) - This provides a backbone to the core of the board. The Bamboo stringer is re-enforced with fibreglass sheeting to provide the optimal balance of flex and strength without sacrificing weight.

5. Foam Substrate -

6. Xtra Duralinx Slick - A high density slick material promoting speed, protection and durability.

This is Mullet's latest creation! The "Bones and Shanks" system is a revolutionary fin system which allows;

• A deck with no visible fin screws
  
• Quick and easy fin installation or removal
  
• Options to surf your Mullet with different fin combinations or finless
  
• Use of other twin tab "hard fins" to increase board performance

 Core Construction

There is more than meets the eye to the Mullets! Every board is created through an extensive development process, then constructed with a range of materials to create a premium product.

Call for Colours 07 55313199

Foam Lord

1. 10lb PE Deck - Deck skin providing perfect amount of strength, durability and traction.

2. Exo-skeletal Membrane (ESM) - A unique layer fused between the EPS core and the deck / slick materials to provide extra strength, durability and impact absorbtion.

3. EPS Core - 100% Waterproof. Light in weight, however provides ultimate strength and durability.

4. Bamboo Stringer Technology (BST) - This provides a backbone to the core of the board. The Bamboo stringer is re-enforced with fibreglass sheeting to provide the optimal balance of flex and strength without sacrificing weight.

5. Foam Substrate -

6. Xtra Duralinx Slick - A high density slick material promoting speed, protection and durability.

This is Mullet's latest creation! The "Bones and Shanks" system is a revolutionary fin system which allows;

• A deck with no visible fin screws
• Quick and easy fin installation or removal
• Options to surf your Mullet with different fin combinations or finless
• Use of other twin tab "hard fins" to increase board performance

Core Construction

There is more than meets the eye to the Mullets! Every board is created through an extensive development process, then constructed with a range of materials to create a premium product.

Call For Colours!!!!